The WaterLOG XL Series consists of some of our most popular Data Logger models—the H-522, H-522+, H-350XL and H-500XL. Specifically designed to collect reliable data under extreme environmental conditions, the XL Series was made for professionals who prefer the familiarity of the interface across all four models.You'll love the simplicity of the display, allowing programming and configuration without the need to hook up a laptop. And for those of you who prefer to use a laptop,rest assured knowing we've made that option available as well. Whatever your data collecting needs may be, you can rely on the XL Series for accurate, dependable data.
The simple, intutitive programming and user friendly display of the H-350XL became the first face of the XL Series. This microprocessor controlled pressure sensor and data logger includes all the features of the H-500XL as well as those of the H-3531 sensor used for a bubble gauge. Combine the H-350XL with our Bubbler (H-3551) and you've got yourself a complete, self containted bubbler system.
H-522 and H-522+
If you're looking for a data logger with a fully integrated HDR transmitter the H-522 and H-522+ are your models. Capable of communicating through GOES, METEOSAT or INSAT satellites, these models are designed for use in remote monitoring applications. The H-522 and H-522+ allow your to transmit data storage and sensor values to a satellite network for near real-time data retrieval. If you don't have the need for a display, the H-522 is your model, but keep in mind, the H-522+ is our top seller, with close to 6000 units in operation to date.
The H-500XL was designed for sites with existing pressure sensors/bubblers, where an internal pressure sensor was not needed. Like the others in the XL Series, this basic model contains a user friendly display, can communicate with GPRS/GMS modems and other means of communication, and is rugged enough for extreme environments.
|GOES/METEOSAT/INSAT satellite transmitter||Optional2||Optional2||Built-in||Built-in|
1 Can interface to the H-3531 external pressure sensor.
2 Can interface to an external H-2221 Satellite transmitter for GOES or METEOSAT; or to an external H-222 DASE (signal engineering) transmitter for INSAT.
|Accuracy||Less than or equal to 0.02% of full scale output (FSO) over temperature range|
|Range||0 to 15 psi (0 to 34 ft (11m)); Accuracy = ±0.007 ft (2.1 mm)|
|0 to 30 psi (0 to 69 ft (21 m)); Accuracy = ±0.014 ft (4.3 mm)|
|Custom calibration ranges available to 100 psi|
|Media Compatibility||Non-corrosive dry gases only|
|Channels||4 single ended, 1 differential|
|Range||o to 5 V (all channels); 0 to 500 mV (additional on channel 1)|
|+5.0 Volt Excitation|
|Accuracy||±5.0 mV over load and temperature range|
|Current||10 mA max load|
|Switched +12.0 Volt Excitation|
|Type||Unregulated based on battery voltage|
|Range||1 to 10 KHz at ±75 mV PP or greater; 1 to 15 KHz at 1 V PP or greater|
|Amplitude||±5.0 V max|
|Type||Switch closure or voltage pulse|
|Voltage Input||0-5 V|
|Frequency Input||100Hx max|
|Channels||2, independently configured for input or output|
|Input Levels||0.0 to 5.0 volts; (High ≥ 3.5 V, Low ≤ 0.8 V)|
|Output Levels||High = 3.5 V Min Sourcing 5 mA; Low = 0.4 V Max Sinking 5 mA|
|Accuracy||± 0.5% FSO|
|Type||Supports both Master and Slave modes|
|Type||3 RS-232 communication ports|
|Connector||9-pin D connector, female|
|Data Storage Capacity||256 MB, Non-Volatile FLASH|
1 Host USB-A Connector, 1 Device Mini-B Connector; Version 2.0
|External Satellite (H-350/H-500)||
|Keypad Display||1 line 20 character vacuum florescent LED display|
|Power||H-350 / H-500||H-522+|
|Voltage Input||10.0 to 16.0 V||11.0 to 16.0 V|
Standby: 5 mA Max; Active: see manual
Standby: 12 mA Max; Active Transmitting: <2.75 A
|Operating Temperature||-40 ° to +60 ° C|
|Storage Temperature||-40 ° to +80 ° C|
|Physical||H-350 / H-500||H-522+|
(L x W x H)
7 in. x 8.5 in. x 4.3 in.
(180 mm x 220 mm x 110 mm)
|9.5 in. x 11 in. x 6 in.
(241.3 mm x 279.4 mm x 152.4 mm)
|Shipping Weight||4.25 lbs (2 kg)||7.5 lbs (3.4 kg)|
|Material||Fiberglass with clear Lexan® window.||Fiberglass (does not have clear Lexan® window)|
The WaterLOG® XL Series is warranted against defects in materials and workmanship for twenty-four months from date of shipment. Click here for complete terms and conditions.
For detailed specifications, see user manual.
The 4.45 Firmware consists of updates and options for a GOES antenna type, leaving 5.00 volt excitation on all the time, and other miscellaneous cleanup and enhancements. Click here for more detailed descriptions or 'Get Firmware' to access current and archived versions.