Storm 3 Datalogger
The Storm family of data loggers offer basic to complex communication and I/O solutions, with data accessibility on any approved smart phone, PC or tablet with a web-browser. Whether you view your data at the site via Wi-Fi or log on to the secure Storm Central website, accessing your data is much simpler, quicker and more convenient than ever before.
How Storm Central Works
The Storm Datalogger transmits data via GPRS or CDMA to a secure server, accessible by login and password. The server is guaranteed for 100% up-time, allowing users to view and retrieve current data at any time. The server auto-backs up daily, keeping your precious data safe.
DAA has Authorized Distributors all over the globe. View a map and find your closest contact for DAA Storm 3 Datalogger products and accessories.
Have a question about your Storm 3 Datalogger? Check out the support page with resources compiled just for you.
Want to return a product for service? Here you'll find authorized service centers and instructions on how to send in your Storm 3 Datalogger.
The Storm Series DataLoggers
The Storm family of data loggers offer basic to complex communication and I/O solutions. All Storm data loggers use the same easy-to-use, browser-based graphical user interface. Migration from one level of Storm data logger to another is simple and intuitive.
The Interface: No special software is required to configure a Storm data logger. It works with all standard web browsers on PC’s, tablets and smart phones including Internet Explorer, Firefox,Chrome, etc.
The Storm 3 is a mid-range data logger with a cost-to-performance ratio that makes it ideal for many applications. The Storm 3 has a balanced set of inputs for analog,digital I/O and smart sensors. Communication options allow it to function with various devices including displays, bubblers and other external communication equipment. You can view both password-protected and public data anywhere with internet access using www.stormcentral.com.
Why Storm Central?
Storm Central can save time and travel by allowing you to bypass physically visiting the datalogging site to retrieve data. When retrieving data at the physical site, the Wi-Fi communication feature can save trips between a vehicle and logger and give access to areas with difficult terrain and obstructions. The low monthly service fee can be a fraction of the cost of such expensive time and travel, potentially saving hundreds, if not thousands, of dollars a year. Your only problem now will be deciding how to use all that extra time. With the money you'll save by using the Storm Central, why not reward yourself with a tablet? Tablets, smart phones and PDA's work with both the Storm Central website via internet, and the Storm, via browser-based Wi-Fi. Goodbye Cable, Hello COMFORT. Thanks to the innovative Storm, your job just got easier.
Click the green "Send Me a Quote" button above for a quote or even more specific information about the Storm Series.
| Data I/O | ||
| Analog Inputs | Channels | 4 single ended |
| Resolution | 24 bit resolution | |
| Accuracy | ±0.025% FS | |
| Range | 0.0 to 5.0 volts (0.001 to 4.998V) | |
| +5.00 Volt Excitation | Type | Switched, ratio metric with A/D |
| Accuracy | ±5.0 mV overload and temperature range | |
| Current | 10 mA max load | |
| Switched+12.0 Volt Excitation | Type | Switched, unregulated based on battery voltage |
| Current | 1A max load, protected by resettable fuse | |
| Constant+12.0 Volt Excitation | Type | Unregulated based on battery voltage |
| Current | 1A max load, protected by resettable fuse | |
| Digital I/O | Channels | 4 general purpose Digital I/O's |
| Modes |
Digital input Counter input Conditional output |
|
| Input Levels | 0.0 to 5.0 volts | |
| Low = 0.08 volts | ||
| High = 3.5 volts or higher | ||
| Low = 0.4 volts max sinking 5 mA | ||
| Counter Frequency | 100 Hz maximum | |
| Counter Debounce | Programmable up to 2 seconds | |
| SDI-12 | Mode | SDI-12 master mode V1.3 compliant |
| Connector | 3 position removable screw terminal | |
| Interface | ||
| RS-232 | Type | Single RS-232 configured as a DTE device |
| Connector | 9 pin D connector, male | |
| Baud Rate | Programmable | |
| RS-485 | Type | Single RS-485 port |
| Connector | 4 position screw terminal | |
| USB | Type |
2 host USB-A connectors USB-A 1 device mini-B conncector |
| Version |
USB version 2.0 |
|
| General | ||
| Power | Input Voltage | 10.0 to 16.0 volts, reverse voltage protected |
| Current Draw | Sleep: 3.5 mA max. Active: 50.0 mA typical | |
| Connector | 2 position screw terminal | |
| RTC | Accuracy (Drift) | < .05 seconds per day |
| Data Storage | Capacity | >256 megabytes |
| LEDs | Power LED | Blinks once every 5 seconds when power is present |
| Active LED | Blinks when active | |
| Environmental | ||
| Temperature | Operation | -40 ° to +60 ° C |
| Storage |
-50 ° to +80 ° C |
|
| Humidity | 0 to 99% non-condensing | |
| IP Rating | IP62 (Dust protection and falling water resistant) | |
| Physical | ||
| Case | Type | Extruded aluminum |
| Size | 4.375 inches wide 2.45 inches deep 7.375 inches high (including end brackets) |
|
| Mounting Hole Pattern |
3.0 inches by 6.80 inches | |
| Mounting Hole Size |
0.375 inches | |
| Accessories (supplied) |
USB communication cable and |
|
|
Miscellaneous |
||
| Warranty |
The WaterLOG® Storm 3 is warranted against defects in materials and workmanship for twenty-four months from date of shipment. |
|
|
Specifications subject to change without prior notice due to ongoing commitment to product testing and improvement. LR January 15, 2013. D25 0311. |
||
Manuals
Catalogs & Brochures
Firmware